Inspection rules for finished power cord

Double quantity shall be taken. Reinspection shall be carried out on non-conforming items, the samples shall be inspected for non-conforming power cord components, prepare the power cord components before production, and the sampling batch shall be one sample per 20km of power cord products. 100% inspection shall be carried out on non-conforming items.Lead all specifications of insulation core, operation requirements for power cord components.To prevent the cable core from being loosened and broken in the winder, three or four different colored wire reels shall be installed in the power cord components on the power cord plug of the winder.The core of the cable is assembled and passed through the shaft hole of the cable winder.Cut the conductor in half and tighten it. The line must be smooth and even during operation.Clear production tasks to remove obstacles around the cablewinder.The take-up disk is mounted on the axis in the take-up position.1 power cord components.1 operators must be familiar with the outer diameter of insulation core of various specifications, and should check the correct pitch of cable before starting production.Structure size, cable connection power cord should be stripped of insulation, according to the requirements of the process card change pitch power cord components, the junction should not be larger tha